60W 80W 100W Explosion Proof Street Light - Class 1 Division 2 - Pole Mount

Key Benefit

  • High Efficacy low decay SMD LED chip,up to 140lm/w @350ma, rated life span 100,000 hrs.
  • High heat transmitting die cast housing with ADC12 aluminum, patented design, IP67 protection grade
  • Shock and vibration resistant tempered glass, super clear 95% light transmit rate
  • Anti-glare.Scientific optical reflector design, making the light more focus,even, comfortable for eyes
  • Meanwell HLG series driver, the highest lever of Meanwell driver
  • Surface treatment-Powder coating with Epoxy Polyester, salt resistant and chemical resistant, patented arc shape heat sink design, to prevent the dust from accumulating on the surface                                     
  • 2.0mm thick aluminum PCB with heat index 2.5, keep LED working under normal temperature
  • EMC test standard, Total harmonic distortion (THD)<10%, minimize the impact towards electric system

 

 

Features

  • Industry-leading efficacy: up to 140 lm/W
  • -40°C to +40°C Ambient operating temperature
  •  Wide optics for uniform illumination
  •  5 years warranty
  •  Entry Size: NPT 3/4”-14 ;
  •  Housing –Aluminum alloy (ADC12 );
  •  Lens – tempered glass
  •  Beam angle: 140° * 80°
  •  Dimension: 650x280x73mm
  • Weight: 10kg

Parameters

  •  Power: Max 60W / 80W / 100W
  •  Input voltage: AC100-240/277V, 50/60Hz
  •  Power factor: 0.97
  •  Light efficacy: 120 - 140lm/W
  •  CCT: 3000K/4000K/5000K/5700K/6500K
  •  LEDs: 3030
  •  LED Driver: Meanwell HLG series

Certificate & Standard

Have certified CES-L fixtures with the NEC and CEC standards for hazardous location and environments

  • Class I, Division 2, Groups A, B, C and D
  • T-Class: T6
  • Damp and wet locations
  • Certificate No:E475887

Mounting

Versatile mounting options:

  • Pole mount

How to install this explosion proof street light?

A.The mounting height around 12m (For example:150W), cantilever length of not more than a quarter of the mounting height , and the elevation should not exceed 15 ° 

B.Installation Step:

  • Place the lamp cord into the pole
  • Insert the lamp into the pole
  • Adjust the lamp direction and fix screw into lock position
  • Fixthe screw into lock position,the torque applied to the screw is 1.08 kg.m
  • The size of cavity inserted into the junction box should not be more than 80mm*40mm*40mm

Seal the gaps between the power driver lid and the plate tightly with silicone glue.

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.