LED EXPLOSION PROOF JELLY JAR Class 1 Division 2
Model No. CES-EX-VP Series

Power: 30W / 60W

The 30W luminaries produces 3900 lumen flux, 60W produces 7800lumen, they can replaces the traditional fluorescent or metal halide class 1 division 2 Jelly Jar fixtures of 100 Watt and 200 Watt. 360 beam angle to illuminate areas. A bracket or pendant (3/4 NPT) mount optional.

CESP Explosion proof jar vapor tight are design to the hazardous location and harsh environments,  Small body, it can be used in tight spaces.

It made of the die-cast aluminum and the tempered glass, good heat resistant 7J impact at IK10 and tempered glass construction, with protection grille. IP66 waterproof, indoor and outdoor can be used. They are sealed and gasketed to protect their internal components from fumes, dust, moisture, rust and corrosion.

For the installation, this explosion proof jelly jar can be mounted directly on ceilings, walls and boxes, or suspended from the ceiling as pendants.

 

• Wastewater treatment, oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases are present.
• Applies to hazardous locations of Class 1 Division 2 with explosive gas atmosphere.

 

Warning

CUL for Hazloc:

  • SUITABLE FOR WET LOCATIONS;
  • THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 40°C;
  • FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST90°C;
  • NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
  • CAUTION - ″TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.″;
  • THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED;
  • CAUTION – RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.

 

Features

  • Light efficacy: 130lm/W
  • -40°C to +55°C ambient operating temperature
  • Wide optics for uniform illumination
  • Entry Size: NPT 3/4”-14
  • Housing – Aluminum alloy (ADC12 )
  • Lens – tempered glass
  • Beam angle: 360°

Parameters

  • Power: 30W OR 60W
  • Input voltage: AC100-240/277V, 50/60Hz
  • Power factor: 0.97
  • CCT: 3000K/4000K/5000K/5700K/6500K
  • LEDs: 3030
  • Power Driver: High Efficiency LED Driver

Ex-proof Standard

NEC and CEC standards for hazardous location and environments

  • Class I, Division 2, Groups A, B, C and D
  • T-Class: T5
  • Damp and wet locations
  • US: UL 844; UL 1598A;
  • Canada: CSA C22.2 No. 137; CSA C22.2 No. 250.0;

Mounting

Versatile mounting options:

  • Wall Mount
  • Pendant
  • Ceilling