Zone 1 Explosion Proof LED Linear Light - ATEX IECEx - 360W 400W

Explosion Proof LED Linear Light - ATEX IECEx Zone 1 Zone 2 - 360W 400W

 

Applications

Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

Standard :
ATEX: EN IEC 60079-0-2018; EN 60079-7-2015; EN 60079-31-2014;
IECEx: IEC 60079-0-2017; IEC 60079-7-2015; IEC 60079-31-2013;

Warning：

IECEx& ATEX :

  • “WARNING – DO NOT OPEN WHEN ENERGIZED”；
  • “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
  • “WARNING – Potential Electrostatic Charging Hazard –Please wipe with a damp cloth when cleaning”;
  • End user shall use certified cable gland suitable type of protection for final installation purpose；
  • External earthing wire shall be connected when used and the cross-sectional area shall be more than 4mm²or 10AWG；
  • Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 165℃ for T3. Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. For CES-EX-LN-02-80、CES-EX-LN-02-100、CES-EX-LN-02-120、CES-EX-LN-02-150, the branch point is 78.4℃ and cable entry point is 66.8℃

Features

  • Luminous flux: 46800LM / 52000LM
  • -40°C to + 50°C Ambient operating temperature
  • 5 years warranty
  • Entry Size: M25 X 1.5
  • Housing – Aluminum alloy (ADC12 and 6063)
  • Lens – Tempered glass
  • LED Driver: Meanwell HLG series

Parameters

  • Power: 360W / 400W
  • Input voltage: AC100-240/277V, 50/60Hz
  • Power factor: 0.97
  • Light efficacy: 120 - 140lm/W
  • CCT: 3000K/4000K/5000K/5700K/6500K
  • LEDs: 3030
  • Bean angle: 90° or 110°
  • Dimension: 564*202*112mm (Single Fixture)
  • Weight: 10.6KG (Single Fixture)，Total 31.8KG

Certificate & Standard

IECEx Certificate No. :  IECEx UL 22.0091X

  •  Ex ec IIC T *Gc
  •  Ex tb IIIC T *°C Db
  •  IP66

IECEx Certificate No. : ATEX Certificate No.: UL 22 ATEX 2543X, UL 22 ATEX 2544X

  •  II 3G Ex ec IIC T*Gc
  •  II 2D Ex tb IIIC T*Db
  •  IP66

Mounting

Versatile mounting options:

  • Ceiling mount
  • Drop mount
  • Wall Mount
  • Mounting Angle：0°to ±90°
Published in Explosion proof Lights Linear & Flood

Related items

1 comment

  • Comment Link SHANKAR CHALLA Sunday, 26 April 2026 11:17 posted by SHANKAR CHALLA

    ITEM-1 Qty 10_LED Square Panel with Integral Battery Backup - Hazardous Type - Suitable for Indoor False Ceiling 30W recessed mount 2 X 2 ft. LED Square lighting fixture along with LED driver having lumen output ≥ 5800 as a minimum & CCT 5000K ,EEx 'db eb', Gas Group IIC, Temp Class T3, IP 65 suitable for Zone-1 & 2 areas, with integral battery backup for 180mins & 25% lumen output. The enclosure shall be fully weatherproof, dustproof (IP-65), tropicalized, corrosion resistant as minimum. The fixture shall have loop in – loop out (through wiring) facility with terminal blocks for min. 3 C x 2.5 mm² cables & have protection against overheating, short circuits, and voltage fluctuations. All luminaires to be supplied complete with necessary accessories (suspension kits) for fixation and installation.It shall be supplied with necessary M20 cable glands & stopper plugs (If applicable). The fixture shall have facility for through wiring with internal terminals and cable entry points. All hardware shall be of Stainless steel 316L.
    ITEM-2 QTY40_LED Square Panel with Integral Battery Backup - Hazardous Type - Suitable for Indoor False Ceiling, 30W recessed mount 2 X 2 ft. LED Square lighting fixture along with LED driver having lumen output ≥ 5800 as a minimum & CCT 5000K ,EEx 'db eb', Gas Group IIC, Temp Class T3, IP 65 suitable for Zone-1 & 2 areas, with integral battery backup for 180mins & 25% lumen output. The enclosure shall be fully weatherproof, dustproof (IP-65), tropicalized, corrosion resistant as minimum. The fixture shall have loop in – loop out (through wiring) facility with terminal blocks for min. 3 C x 2.5 mm² cables & have protection against overheating, short circuits, and voltage fluctuations. All luminaires to be supplied complete with necessary accessories (suspension kits) for fixation and installation.It shall be supplied with necessary M20 cable glands & stopper plugs (If applicable). The fixture shall have facility for through wiring with internal terminals and cable entry points. All hardware shall be of Stainless steel 316L.

Send Your Inquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.

back to top