This Flameproof Hand Lamp / Drop Light is 180 beam angle, comes complete with 10 meters (according to your requirement can be more longer) of explosion proof cord and an inline transformer that steps down 220V AC to 24V AC or DC for powering the lamp. The hand lamp is designed to provide an effective low voltage lighting solution for operators requiring a versatile source of illumination.

This hazardous location hand lamp is 10W, 20W, 30W power optional, ATEX IECEx Listed Zone 1 & 21, Zone 2 & 22, is ideal for general work task lighting in hazardous locations requiring explosion proof protection.

*PLEASE NOTE: THE TRANSFORMER MUST BE LOCATED OUTSIDE THE HAZARDOUS LOCATION*

Contact us ask for detail “Layout Diagram” will be more clear: This email address is being protected from spambots. You need JavaScript enabled to view it.

Warning：

IECEx & ATEX:

• “WARNING – DO NOT OPEN WHEN ENERGIZED”
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”
• “WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD - SEE INSTRUCTIONS”
• THE FLAMEPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED.

• End user shall use certified cable gland type of protection for final installation purpose.
• Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 80℃for T6.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is60.1℃ and cable entry point is 52.℃.
• For handle, there is “POTENTIAL ELECTROSTATIC CHARGING HAZARD”. When used in the explosive environment, please touch with an insulating object, wipe with a damp cloth.