Explosion Proof Emergency Lighting - IECEx ATEX Zone 1 & 21 - 120W/150W/180W/200W

Description:

This ATEX led emergency light fixtures with an emergency backup battery (12W Li-ion battery), the emergency backup lighting provide 1680 lumens for the 1.5 hours. For the normal lighting , the input voltage is AC100 - 277V, 120W, 150W, 180W, 200W power optional.

This floodlight explosion proof LED fixtures on only obtained IECEx and ATEX certificate, can used for the Zone 1 Zone 21, Zone 2 Zone 22. For design and structure, this emergency explosion proof light made of the die-cast aluminum and the 8mm high tempered glass. Good heat and 6J impact resistance.

If you need anti-corrosion performance for the marine environment, that is optional. We adopt to the electrophoresis technology and the multiple coats of marine anti-corrosion paint, the all the mounting brackets and accessories are made of 316 stainless steel. Certified by UL1598A and CCS.

ATEX: EN 60079-0: 2013 ; EN 60079-7: 2015 ; EN 60079-18: 2015 ; EN 60079-28: 2015 ; EN 60079-31:2014;

Warning

  • “WARNING – DO NOT OPEN WHEN ENERGIZED”
  • “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”
  • “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”
  • End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose.
  • External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG.
  • Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 95℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally.

 

Features

  • Industry-leading efficacy: up to 130lm/W±5
  • -40°C to +55°C Ambient operating temperature
  • Amounting: U-bracket
  • Wide optics for uniform illumination
  • 5 years warranty
  • Entry Size: M25Χ1.5 or NPT 3/4”-14
  • Housing –Aluminum alloy (ADC12 )
  • Lens – tempered glass
  • Beam angle: 8°, 15°, 35°, 60°, 90°, 108°, 120°

Parameters

  • Power:120W/150W/180W/200W
  • Input voltage: AC100-240/277V, 50/60Hz
  • Power factor: 0.97
  • Lumen flux: 14400lm/18000lm/22200lm
  • CCT: 2700K - 6500K (Optional)
  • LEDs: 3030
  • LED Driver: Meanwell HLG series
  • Dimension: 400mm x 400mm x 169(248)mm
  • Weight: 10.5KG
  • Backup battery: Li-ion battery, 12W power
  • Emergency: ≥90 mins

Certificate & Standard

Have certified CES-J fixtures with the IECEX and ATEX standards for hazardous location and environments.

ATEX:
  • EX II 2G Ex eb mb op is IIC T4 Gb
  • EX II 2D Ex op is tb IIIC T95°C Db
  • IP66
  • Certify No:IEP 19ATEX 0714
IECEx:
  • Ex ec IIC T4 Gc
  • IP66
  • Certify No:IECEx UL 18.0046

Special order

  • Special Orders- Requirements
    Contact us for special requirements
    Tel: +86-755-83509822
    Fax: +86-755-83509868
    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

1 comment

  • Comment Link moupassi Tuesday, 19 July 2022 11:28 posted by moupassi

    hello could I have a quote on this article followed by its technical sheet

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.