CES-EX-GB Seris (ATEX / IECEx)

Explosion Proof LED High Bay Light

Power:100W/120W/150W/185W/200W

 

Although it is a high-power explosion-proof high bay lighting, the flameproof enclosure design can prevent the electric spark generated in the lamp from being transmitted to the outside. And its rating is IP66, it can withstand 7J shock and vibration, and its explosion-proof performance is more reliable than HPS explosion-proof lamps, metal halide lamps, halogen lamps, etc., and can be used in hazardous areas Zone 1&21, Zone 2&22.

Explosion Proof LED High Bay Light

 

Corrosion-resistant ADC-12 aluminized body and LED lamp components give this lamp excellent durability, vibration resistance, impact resistance and marine corrosion resistance, and it is suitable for salt water and corrosive environments. The shell is specially designed for heat dissipation, which can improve the efficiency and service life of the LED transmitter. Each cavity of the whole lamp adopts the design of threaded joint surface. Each cavity such as the wiring cavity, power supply cavity, and light source cavity is independently divided into cavities. The explosion-proof performance is reliable and very Suitable for your explosion-proof needs.

Features

  •  Industry-leading efficacy: up to 140 LPW
  •  -40°C to +55°C ambient operating temperature
  •  Low profile fixture
  •  Wide optics for uniform illumination
  •  Fixture warranty
  •  Entry Size: M25Χ1.5
  •  Housing –Aluminum alloy (ADC12);
  •  Lens –tempered glass;
  •  Beam angle: 120°
  • Emergency optional
 
 

Parameters

  • Power: 100W/120W/150W/185W/200W
  • Input voltage: AC100-240/277V, 50/60Hz
  • Power factor: 0.97
  • Light efficacy: 110 - 140lm/W
  • CCT: 3000K/4000K/5000K/5700K/6500K
  • LEDs: 3030
  • LED Driver: Meanwell HLG series

Certificate & Standard

Have certified CES-EX-GB fixtures with the IECEX and ATEX standards for hazardous location and environments

IECEX:

  • Ex db op is IIC T4…T5…T6 Gb;
  • Ex tb op is IIIC T103°C…T98°C …T93°C Db;
  • IP66;
  • Certificate No:IECEx SEV 19.0040X

ATEX:

  • II 2G Ex db op is IIC T4…T5…T6 Gb;
  • II 2D Ex tb op is IIIC T103°C…T98°C …T93°C Db;
  • IP66;
  • Certificate No:SEV 19 ATEX 0334 X
  • T-Class: T * (T4A / T5 / T6)

Mounting

Versatile mounting options:
  • Ceiling mount
  • Drop mount
  • Wall mount
  • U-Bracket mount
  • Mounting Angle:0°to ±90°;

Dimension

Applies to CES-EX-GB-100, CES-EX-GB-120, CES-EX-GB-150, CES-EX-GB-185, CES-EX-GB-200.

ΦxH: Φ460 x 243(287)mm

explosion proof led high bay lighting size

Applications

Applied to Zone 1&21,Zone 2&22, such as wastewater treatment, oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor or indoor mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

WARING FOR THIS EXPLOSION PROOF LED HIGH BAY LIGHTING

IECEx & ATEX :

  • “CAUTION-USEFASTENER WITH YIELD STRESS ≥ 640 MPa”;
  • “WARNING – DO NOT OPEN WHEN ENERGIZED”;
  • “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”;
  • “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”;
  • " WARNING - DETAILED TEMPERATURE CLASS - SEE INSTRUCTIONS”;
  • “THE FLAMPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED”;
  • End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose;
  • External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG;
  • Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is 83.6℃ and cable entry point is 69.4℃

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.