explosion proof led hand lamp

CES-EX-SC ( Zone 1 )

Explosion Proof LED Hand Lamp

Power:10W/20W/30W

CES-EX-SC LED explosion-proof hand lamp is durable, corrosion-resistant, and has undergone extreme hydraulic and heavy pressure tests. It can withstand 7J pressure and 3M underwater operation. It has anti-vibration and impact resistance, and its service life is much longer than that of incandescent bulbs. It has the characteristics of small size, light weight, portable belt, etc., 180° or 360° light-emitting angle, satisfying all aspects of lighting,and can be used in hazardous areas Zone 1&21, Zone 2&22.

IECEx Certificate No: IECEx SEV 20.0003X-Eurofins           ATEX Certificate No: SEV 20 ATEX 0369 X-Eurofins

explsion proof led string lighting

   accessories for explosion proof hand lamp

CES-EX-SC series LED hand lights use high-efficiency LED chips and do not require ballasts, so the operator does not need to drag the ballast housing around. The light produced by the device has a color temperature of 6000K, which is clearer and whiter than the light produced by incandescent lamps, and There is no glare.The light produced by this kind of work light is very suitable for close work and inspection activities that require good contrast and true color performance. The whole chandelier has the characteristics of small size, light weight, portability, hanging type, etc., and the ergonomic portable lamp design can be hand held, placed on the table, magnetic adsorption, hanging lighting and other methods, which is very suitable for your project.

Features

  • Industry-leading efficacy: up to 140 LPW
  • -20°C to +40°C ambient operating temperature
  • Low profile fixture
  • Ceiling, Drop and Wall mount options
  • Fixture warranty
  • Multiple shapes
  • Entry Size: PG9
  • Housing(white) –Aluminum alloy (ADC12)
  • Tempered glass

Parameters

  • Power: 10W/20W/30W
  • Input voltage 1: AC100 V-277 V, 50/60Hz
  • Input voltage 2: DC 110 V
  • Input voltage 3: DC 12V-24V
  • Power factor: 0.97
  • Light efficacy: 100 - 140lm/W
  • CCT: 3000K/4000K/5000K/5700K/6500K
  • LEDs: 3030

Certificate & Standard

Have certified CES-EX-SC fixtures with the IECEX and ATEX standards for hazardous location and environments

IECEx:
  • Ex db eb IIC T6 Gb;
  • Ex tb IIIC T 80°C Db;
  • IP66;
  • Certificate No:IECEx SEV 20.0003X;
ATEX:
  • Ex II 2G Ex db eb IIC T6 Gb;
  • Ex II 2D Ex tb IIIC T 80°C Db;
  • IP66;
  • Certificate No:SEV 20 ATEX 0369 X;

 

Mounting

  • Terminals are provided in the handle for wiring. The handle is a “e” chamber. You can use it as a string of lights, or with emergency power supply, extension cords, etc., we provide you with a safe solution.

Dimension

Figure 1 applies to Explosion proof LED Hand Lamp CES-EX-SC30, CES-EX-SC20, CES-EX-SC10

Φx H: Φ101.5 x 516.5 mm

LED explsosion proof hand light 30W

Applications

CES-EX-SC Explosion proof LED Hand Lamp can Applied to Zone 1&21,Zone 2&22 hazardous areas, harsh environments, such as fast factory turnover, MRO projects, oil fields, maintenance, sealed spaces, and marine sites And tank cleaning etc.

Warning

IECEx & ATEX :

  • "WARNING – DO NOT OPEN WHEN ENERGIZED”
  • “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”;
  • “WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD - SEE INSTRUCTIONS”
  • THE FLAMEPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED.
  • End user shall use certified cable gland type of protection for final installation purpose.
  • Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 80℃ for T6.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is 60.1℃ and cable entry point is 52.0℃.
  • For handle, there is “POTENTIAL ELECTROSTATIC CHARGING HAZARD”. When used in the explosive environment, please touch with an insulating object, wipe with a damp cloth.

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.