Explosion proof LED Flood Light CES-J Series

CES-J Series ( IECEx / ATEX Zone 1 )

Explosion Proof LED Flood Light

Power:20W/30W/40W/60W/80W/100W/120W/150W/180W/200W

Compared with traditional explosion proof lighting fixture, the service life of this explosion-proof LED floodlight is more than 50,000 hours, and the maintenance is reduced to 30% of the double input cost of the traditional lighting system. At the same time, the flood lighting device is equipped with a well-designed optical system and uses adjustable installation. The frame brings high luminous efficiency and various luminosity options, and can be used in hazardous areas Zone 1&21, Zone 2&22. ATEX Certificate No:IEP 19ATEX 0714

explosion proof led flood light

Although the appearance is very simple, the lamp body uses the ADC12 shell with UL 1598A North American marine anti-corrosion certification, and the transparent part uses tempered borosilicate glass, which has better shock and vibration resistance. It has passed precise light distribution design and good The optical system, coupled with an excellent 3D heat dissipation structure design, makes this high-power hazardous area floodlight have the best lighting level and the lowest maintenance cost, and there are a variety of installation methods for you to choose, which is your lighting solution The best choice for the program.

 

Features

  • Industry-leading efficacy: up to 130 LPW
  • -20°C to +40°C Ambient operating temperature
  • Low profile fixture
  • Flush, swivel and pole mount options
  • Wide optics for uniform illumination
  • Fixture warranty
  • Entry Size: M26Χ1.5 or M25Χ1.5 or NPT 3/4”-14
  • Housing –Aluminum alloy (ADC12 );
  • Lens –tempered glass
  • Beam angle: 8°, 15°, 35°, 60°, 90°108°, 120°

Parameters

  •  Power:20W/30W/40W/60W/80W/100W/120W/150W/180W/200W
  •  Input voltage: AC100-240/277V, 50/60Hz
  •  Power factor: 0.97
  •  Light efficacy: 110 - 140lm/W
  •  CCT: 3000K/4000K/5000K/5700K/6500K
  •  LEDs: 3030
  •  LED Driver: Meanwell HLG series

Certificate & Standard

Have certified CES-EX-J fixtures with the IECEX and ATEX standards for hazardous location and environments.

ATEX:
  • II 3G Ex ec IIC T4 Gc;
  • IP66;
  • Certificate No:DEMKO 18ATEX 1765
IECEx:
  • Ex ec IIC T4 Gc;
  • IP66;
  • Certificate No:IECEx UL 18.0046

Mounting

Versatile mounting options:
  • Ceiling mount
  • Drop mount
  • Pole mount
  • Wall Mount
  • Mounting Angle:0°to ±90°;

Dimension

Figure 1 applies to CES-J40S.

Length x width x height: 200mm x 200mm x 147 (195.5)mm

40W LED Explosion proof Flood Light

Figure 2 applies to CES-J100.

Length x width x height: 300mm x 300mm x 165 (251)mm

100W LED Explosion proof Flood Light

Figure 3 applies to CES-J200.

Length x width x height: 400mm x 400mm x 169 (248)mm

200W LED Explosion proof Flood Lights

Applications

This LED explosion-proof flood light can applied to Zone 1&21,Zone 2&22
Harsh and low temperature environments, such as Localised lighting, low level lighting, Stairwells, Gantry and walkways, Process skids, cable tray areas, Marine void spaces with low overheads, Paint and solvent storage rooms, Gas Pumping stations, Offshore oil and gas platforms, Chemical industry and so on.

Warning

ATEX&IECEX :

  •  “WARNING – DO NOT OPEN WHEN ENERGIZED”
  •  “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”
  •  “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”
  •  End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose.
  •  External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG.
  •  Under rating condition, maximum temperature on the luminaire’s shell shall not be
  • higher than 95℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally.

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.