1ft 2ft Explosion Proof Fluorescent Light Replacement - Zone 1 Zone 21 - Ceiling Mount

 

Applications:

• Wastewater treatment,oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.
• Applies to hazardous locations of Zone 1 and Zone2 with explosive gas atmosphere.
• Applies to hazardous locations of Zone 21 and Zone22 with explosive dust atmosphere.

ATEX: EN IEC 60079-0-2018; EN 60079-7-2015; EN 60079-18-2015; EN 60079-31-2014;
IECEx: IEC 60079-0-2017; IEC 60079-7-2015; IEC 60079-18-2014; IEC 60079-31-2013;

IECEx & ATEX :

  • “CAUTION-USEFASTENER WITH YIELD STRESS ≥ 640 MPa”;
  • “WARNING – DO NOT OPEN WHEN ENERGIZED”;
  • “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”;
  • “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”;
  • " WARNING - DETAILED TEMPERATURE CLASS - SEE INSTRUCTIONS”;
  • “THE FLAMPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED”;
  • End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose;
  • External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG;
  • Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is 83.6℃ and cable entry point is 69.4℃

Features

  • Industry-leading efficacy: up to 120lm/W±5
  • -40°C to +45°C /50°C /55°CAmbient operating temperature
  • Wide optics for uniform illumination
  • 5 years warranty
  • Entry Size: M25Χ1.5 or NPT 3/4”-14
  • Housing –Aluminum alloy (ADC12 )
  • Lens – tempered glass (10mm)
  • Beam angle: 120°

Parameters

  • Power (1 Foot): 20W / 30W
  • Power (2 Foot): 20W / 30W / 40W / 50W
  •  Input voltage: AC100-277V, 50/60Hz
  •  Power factor: 0.97
  •  Lumen flux: 2400LM - 6000LM
  •  CCT: 2700K - 6500K (Optional)
  •  LEDs: 3030 (6V)
  •  LED Driver: High efficiency driver
  •  Dimension: 329 mm x 125mm x 88.7 mm / 629 mm x 125mm x 88.7 mm
  •  Weight: 2.5KG (1 Foot), 3KG (2 Foot)

Certificate & Standard

Have certified CES-EX-LN-02P fixtures with the IECEX and ATEX standards for hazardous location and environments.

ATEX:
  • II 2G Ex eb mb IIC T5…T6 Gb
  • II 2D Ex tb IIIC T**°C
  • IP66
  • Certificate No:SEV 21 ATEX 0578 X
IECEx:
  • • Ex eb mb IIC T5…T6 Gb;
    • Ex tb IIIC T**°C;
    • IP66
    • Certificate No:IECEx SEV 21.0038X

 

Amounting

Versatile mounting options:

  • Ceiling mount (See Installation manual of CES-EX-LN-02P )
  • Mounting Angle:0°to ±90°;

1 comment

  • Comment Link Albert Wednesday, 09 March 2022 12:25 posted by Albert

    Dear Sirs/Madams

    Please send the details of 30W 4000K (629 mm x 125mm x 88.7 mm) for our information.

    Thanks.

    Albert
    Lumitech Lighting Engineering Co., Ltd
    Mobil: 86 153 3816 1613 / 853 6613 6688

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.